Graffiti Gone Green safely removes paints, lacquers, varnishes, and the like. This environmentally friendly, fully biodegradable solvent replaces MEK, 111 trichlorethane, and other flammable, hazardous solvents. Strips away and dissolves graffiti, urethane, epoxy, cyanoacylate, polymers, adhesives, paints, etc. Thick, paintable formula may be used on vertical or horizontal surfaces, as well as concrete, ceramic, and terrazzo.
- Non-toxic, Non-hazardous & Non-flammable
- Made with Renewable Resources
- Environmentally Safe Formula
Brush on scrape off: Apply product with a brush. Allow to remain in contact with the surface until “Blisters” are observed. Scrape off with a mild detergent cleaner. Time to bubbling depends upon paint. Typical waiting time can be 1 minute for alkyd paints, 30 minutes for epoxy, and 2-3 hours for urethane.
Brush on flush off: Apply as above; flush off with strong jets of water.
Spray or immersion: Spray solvent with a metallic sprayer and proceed as above. For small parts, an immersion type of application is recommended.
Prior to using on a pre-painted surface, test a small area to ensure paint is not removed along with graffiti. These towelettes may attack certain plastics. Like any cleaning product, may be harmful if swallowed. May irritate eyes and skin. Do not take internally. To use safely, reseal container after use, avoid contamination of water, food or feed by use or storage, and store away from heat or open flame.
KEEP OUT OF REACH OF CHILDREN
For Eyes: Flush thoroughly with cool water for at least 15 minutes. If irritation persists, obtain medical assistance.
For Skin: Wash with soap and water.